What does physical security require in the office and remote work?

Physical security protects devices, premises and information. The law requires risk-based measures, not one fixed checklist for every workplace.

· 10 min read · Written by AI · checked by AI

In brief

Physical security means protecting work information, devices, networks and premises from risks that start in the physical world. It covers doors, badges, desks, screens, printouts, visitors, cleaning, maintenance and remote work locations. The Cybersecurity Act 124/2025, section 9, and the NIS2 Directive (NIS2) Article 21 require risk-based and proportionate measures for network and information systems and their physical environment. They do not give one office checklist for every organisation, so you choose the measures according to your risks, operations and information.

Physical security is not only a locked door

A locked door is only one part of physical security. The real question is who can reach the device, the screen, the paper, the cable, the meeting room or the storage space.

The Cybersecurity Act 124/2025, section 9, requires organisations within its scope to use proportionate technical, operational or organisational security controls for cybersecurity risk management. The same section names the physical environment and premises security of communication networks and information systems as a required area of risk management.

NIS2 Directive Article 21 takes the same approach. It requires appropriate and proportionate measures to manage risks to the security of network and information systems. It also says the measures must follow an all-hazards approach that protects those systems and their physical environment.

In everyday work, this means that cyber risk is not only about malware, passwords and cloud settings. A confidential printout left on a meeting room table can be a physical route to the same information. An unlocked laptop in a shared space can become a system access risk. A visitor walking behind a reception desk can become an access control issue.

Physical security should therefore be part of the same cybersecurity risk management model as technical security. The office layout, remote work practices and staff habits all matter.

Access control is access management for premises

Access control means that only the right people can reach the right place, system or information. In digital systems, this often means user rights and authentication. In premises, it means who can enter which rooms, at which times and under which conditions.

The Cybersecurity Act 124/2025, section 9, names access control and authentication procedures as an area that must be included and kept up to date in cybersecurity risk management. NIS2 Directive Article 21 also names personnel security, access control policies and asset management.

For an office, access control can include:

  • separating public areas from work areas;
  • limiting access to rooms with network equipment, servers, archives or shared devices;
  • handling keys, badges or codes as access rights, not as office conveniences;
  • removing access when a role changes or work ends;
  • noticing when someone is in a space without a work reason.

The law does not say that every organisation must use the same badge system or door technology. It requires a proportionate outcome. A small office with low exposure may need different controls than a multi-site service provider that handles critical systems or large volumes of sensitive information.

The same logic continues in system access. Physical access to a device can become digital access if a screen is open or a session is active. This is why physical access control and authentication belong together. More on the digital side continues in Access control, multi-factor authentication and encryption: three measures the law names.

A clean desk protects information when work stops

A clean desk rule means that work information is not left visible or reachable when it is not being used. It can cover papers, notebooks, sticky notes, removable media, access cards and visible screens.

The Cybersecurity Act 124/2025 does not use the words clean desk. NIS2 Directive Article 21 does not either. That matters. A clean desk is not a separate statutory magic phrase.

It is still a practical way to meet the legal requirement when the risk is real. The Cybersecurity Act 124/2025, section 9, includes basic security practices for operations, hardware, software and information asset security. It also includes personnel security and the physical environment. A desk with exposed papers, passwords, case notes or customer information is part of that environment.

A clean desk approach is most useful when work is interrupted. An employee leaves for lunch. A cleaner enters after hours. A meeting room is used by another team. A laptop is visible through a window. In each case, the risk is not that the desk is untidy. The risk is that information is available to someone who has no work reason to see it.

The rule should match the work. A reception area, shared workspace or open-plan office usually needs clearer habits than a locked single-person room. Work with classified or sensitive information usually needs stricter handling than work with public material. For practical classification, see Why is information classified and how does the class guide use.

Printouts are information assets, not office supplies

A printout is still information. It may be easier to lose than a file, because it does not need a password, a network or a user account.

The Cybersecurity Act 124/2025, section 9, includes asset management and basic security practices for information asset security. NIS2 Directive Article 21 also includes asset management as part of the required minimum areas for cybersecurity risk management measures.

This means printouts should be handled according to the information they contain. A page with meeting catering details is not the same risk as a page with customer data, credentials, technical architecture or internal incident notes.

Useful questions are simple:

  • Who may see this printout during the workday?
  • Where may it be left during a pause?
  • Is it allowed in a meeting room after the meeting ends?
  • How is it transported between office and remote work?
  • How is it destroyed when no longer needed?

The law does not set one required bin, cabinet or printer rule in the cited provisions. It requires that the organisation’s controls are appropriate and proportionate. Where printing is common, secure collection, storage and disposal can be part of that answer. Where printing is rare, the key control may be a clear rule that sensitive material is not printed unless there is a work reason.

Visitors, maintenance and cleaning belong to the same risk picture

Visitors are not only guests. Maintenance staff, cleaning staff, contractors, delivery staff and temporary workers can all enter spaces where information or systems are present.

NIS2 Directive Article 21 requires an all-hazards approach. That means the organisation should look at many kinds of risk, not only deliberate cyberattacks. The Cybersecurity Act 124/2025, section 9, also names supply chain security, personnel security, access control and the physical environment.

In practice, this connects visitor practices with supplier and contractor practices. A cleaner may not be a cyber threat. Still, cleaning happens near desks, printers, bins and meeting rooms. A maintenance visit may require access to locked spaces. A contractor may bring equipment into the premises. These situations should be treated as part of the same risk picture as user rights and device security.

The cited law does not say that every visitor must be logged in a specific system. It does not name a reception process. It does not require the same badge colour, escort rule or sign-in method for every workplace.

It does require proportionate measures. If visitors can reach non-public areas, devices, network points or information, the organisation needs a controlled way to decide who enters, why they enter and what they can reach. If immediate suppliers or service providers are involved, NIS2 Directive Article 21 requires their relevant vulnerabilities, product quality and cybersecurity practices to be taken into account when choosing supply chain measures.

In remote work the physical environment changes, but responsibility for information does not disappear

Remote work changes the physical environment. The office door, reception desk and locked cabinet may no longer exist. The same information may be handled at home, in a shared workspace, on a train or in another temporary place.

The legal duty does not disappear because the work location changes. The Cybersecurity Act 124/2025, section 9, is about risks to communication networks and information systems and about controls for those risks. NIS2 Directive Article 21 is about network and information systems used in operations or service provision and their physical environment.

Remote work therefore needs its own physical security habits. The issue is not whether the sofa, kitchen table or shared workspace is an office. The issue is whether work information, devices or systems are exposed.

Common physical risks in remote work include:

  • a family member, visitor or stranger seeing a screen;
  • a device being left unattended in a public place;
  • paper notes travelling outside the office;
  • work calls being overheard;
  • a lost device creating both physical and digital risk.

Remote work also links physical security with device and network security. A laptop that is physically lost can become an information security incident if the wrong person can use it or read its data. This topic continues in Remote work security: devices, networks and what to do when ransomware strikes.

Practical measures are chosen by risk

The Cybersecurity Act 124/2025, section 9, says measures must be proportionate to the nature and scale of the activity, the reasonably foreseeable immediate effects of an incident, the risk exposure of the networks and information systems, the likelihood and severity of incidents, the costs of measures and the technical possibilities available to prevent threats. NIS2 Directive Article 21 uses the same risk-based idea.

This is why physical security should not be copied blindly from another organisation. A municipality service desk, a healthcare supplier, a software company and a small office do not have the same risk profile.

A practical risk-based view can look like this:

Workplace situation Physical security question Possible control type
Open-plan office Can unauthorised people see screens or papers? Desk habits, screen locking, visitor boundaries
Meeting room Are papers, whiteboards or devices left after meetings? End-of-meeting checks, storage and disposal rules
Printer area Can anyone collect or read printouts? Printer placement, collection practice, printout handling
Server or network room Who can enter and why? Restricted access, role-based permission, supplier handling
Remote work Can others see, hear or take work information? Location guidance, device care, paper limits

The table is not a legal checklist. It is a way to connect daily situations with the risk areas named in the Cybersecurity Act 124/2025 and NIS2 Directive Article 21.

Good measures are understandable to employees. A rule that cannot be followed during normal work will not protect much. Staff need to know why a visitor cannot be let through a door, why a printout cannot stay on a desk, and why a screen should not be left open. The staff training duty is discussed further in NIS2 and the Finnish Cybersecurity Act: management training and staff cyber hygiene.

Where the line is and what the law does not say

The cited provisions set duties at the level of risk management. They do not give a universal office rulebook.

They do not state that every organisation must have:

  • a clean desk policy with a specific wording;
  • a visitor register in a particular system;
  • badges, turnstiles or cameras;
  • one printer model or one disposal method;
  • the same remote work setting for every role.

They also do not make physical security a separate topic from cybersecurity. The Cybersecurity Act 124/2025, section 9, places physical environment and premises security inside cybersecurity risk management. NIS2 Directive Article 21 does the same by connecting network and information systems with their physical environment.

The honest boundary is this: the law requires appropriate and proportionate controls, but the exact control depends on the organisation’s situation. The more serious the possible effect of an incident, the more important it is to show that the organisation has considered physical access, staff practices, suppliers, information assets and remote work as part of one risk model.

For a buyer, the practical test is simple. If an employee, visitor, contractor or family member can reach information or systems without a work reason, there is a physical security question. If that exposure could affect services, customers, staff, partners or operations, it belongs in cybersecurity risk management.

Frequently asked questions

Does the law require a clean desk policy in the office?

The Cybersecurity Act 124/2025 and NIS2 Directive Article 21 do not name a clean desk policy as a fixed rule. They require proportionate measures for cyber risk management, including the physical environment, access control, personnel security and information asset security. A clean desk policy can be one practical measure when papers, notes or devices could expose work information.

What does access control mean in cybersecurity?

Access control means deciding who may enter a space, use a system or reach information. In an office it can mean doors, badges, visitor handling and areas where only certain roles may go. In systems it can mean user rights and authentication. The Cybersecurity Act 124/2025, section 9, names access control and authentication procedures as part of risk management.

Does physical security also cover remote work?

Yes, if remote work uses the organisation’s network and information systems or handles its information. The legal duty is not tied only to the office. NIS2 Directive Article 21 requires an all-hazards approach that protects network and information systems and their physical environment. At home or while travelling, that environment is different, so the measures are chosen by risk.

Must office visitors be recorded in a system?

The cited law does not say that every visitor must be recorded in a system. It requires proportionate technical, operational and organisational measures. Visitor practices may be needed if visitors can reach devices, networks, printed information or restricted work areas. The method depends on the organisation’s risks, size and operations.

What should be done with printouts during the working day?

The law does not give a detailed printout rule. It does require measures for information asset security, asset management and the physical environment. In practice, printouts should be treated as work information, not as harmless office supplies. The organisation should decide when papers may stay visible, when they must be stored and how they are disposed of.

Sources